LUBRICANTS FOR COLD FORMING/EXTRUSION
ULTRAFILTRATION - DIANA C 500
Diana C 500 units are proposed for the continuous regeneration of hydrocarbons, synthetic oils and mineral oils. The regeneration cycle provides for the continuous elimination of the pollutants which generally cause the aging of these fluids, i.e. water, metals, soaps, non-reactive salts, oxides, degradation polymers, complex metals, etc.
CONDORLUBE RO11
Classic reactive oil based on polyphosphoric acids da utilizzare in vasche ad immersione
CONDORLUBE FL 500
Synthetic, water soluble lubricant for wet drawing of wires of any metal.
CONDORLUBE R 666
Product suitable for all metals, used as lubricant in pipe cutting and sheet metal sampling operations. Condorlube R 666 is a no rinse product. It evaporates in the air.
CONDORLUBE DF 18
Non-reactive water based polymeric lubricant, for cold forming of carbon steel and stainless steel and non-ferrous materials. Compared to the traditional polymeric lubricants, it is suitable for high reductions.
CONDORLUBE RO12
Classic reactive oil based on Polyphosphoric acids. It is applied directly in the machine
CONDORLUBE W 1898
Reactive soap based on sodium stearate. It is mainly used after phosphating treatments before drawing processes.
CONDORLUBE DRAW 14
Water-soluble coolant, based on vegetable soaps, it is primarily used to replace the classic emulsions in molding and shearing operations.
CONDORLUBE TR BT
Mineral oils based lubricant, with additives with sulfur compounds, for the drawing and calibration of wires, rods, bars and pipes in high-alloy carbon steel.
CONDORLUBE 281 SAL
Boric free non reactive salt, it is mainly applied in preparation of carbon steel and stainless steel rods to drawing processes