CARBON STEEL
STAINLESS STEEL AND TITANIUM
ALUMINIUM COILS
COIL COATING
COPPER AND ALLOYS
PAINTS FOR COIL COATING
CARBON STEEL
STAINLESS STEEL
ALUMINIUM AND ALLOYS
COPPER AND BRASS
TITANIUM ZIRCONIUM AND NICKEL
CARBON STEEL
STAINLESS STEEL
ALUMINIUM AND ALLOYS
COPPER AND ALLOYS
TITANIUM-ZIRCONIUM-NICKEL
CARBON STEEL
STAINLESS STEEL
ALUMINIUM AND LIGHT ALLOYS
COPPER AND ALLOYS
ALUMINIUM PRE-PAINTING
METAL PRE-PAINT
PAINT STRIPPING
BOOTH WATER TREATMENT
QUENCHING POLYMERS
ZINC REMOVAL
PICKLING
DEGREASING
QUENCH
PASSIVATION
ANODIZING
COLORING
FIXING
SURFACE PREPARATION
VIBROFINISHING PRODUCTS
STAINLESS STEEL
COPPER AND ALLOYS
CHEMICAL ETCHING
PENETRANTS
DEGREASERS
PRINTED CIRCUITS
ANTIFOAM
DETERGENT
AIR RELEASE AGENT
CONDITIONERS
DETERGENT
WATER TREATMENT
ANTIFOAM
ACTIVE CARBON
PICKLING - DEOXIDATION
CLEANING
WATERBORNE DEGREASER
SOLVENTBORNE DEGREASER
PAINT STRIPPING
DEGREASING
CONDORINE 841 CM
Slightly alkaline powder product. Suitable for any metal, free of caustic soda and ligninsulphonates. It is mainly used to remove the polishing pastes. e.g in plating lines. Condorine 841 CM is used in immersion systems while Condorine 841 SP is used in spray systems.
CONDORINE 144 CU
Slightly alkaline liquid product. Suitable for degreasing of copper alloys also for quick operation in line. It avoids hydroxides precipitation and is chosen when a passivation with triazoles follows. To be used also by spray.
ULTRAFILTRATION - M400 - MINERVA
M400 and MINERVA units are used to continuously regenerate acid, alkaline and neutral aqueous matrix degreasing baths used in painting and in the mechanical, metallurgical, food industries, etc. (For solvents see Diana unit – section: Lubrication)
CONDORINE 112
Slightly alkaline degreaser used for the degreasing in immersion or spray plants
CONDORINE SG 588 P
Alkaline powder degreaser ideal for carbon steel and copper alloys. Formulated to remove oils, greases and rolling pastes.