PICKLING
CONDORITE 753
Pickling agent for ferritic stainless steel and for removal of light oxidations from austenitic stainless steel.
DESCALINOX P 13
Balanced acid product for stainless steel pickling with nitric free solutions to be used combined with our Oxydizer OX 53.
DESCALINOX P14
Nitric free pickling for austentic stainless steels and duplex alloys. It requires the addition of hydrogen peroxide. It is preferred to descalinox P 13 where surfaces are contaminated with oil.
DESCALINOX P 13 FAST - P 14 FAST
Evolution of the previous P13 and P14, they contain special additives that accelerate the pickling speed, reducing the treatment times. To be used combined with our Oxydizer OX 53.
DESCALINOX P 13 TPF - P 14 TPF
Pickling agents for stainless steel. They are the evolution of Descalinox P13 FAST and Descalinox P 14 FAST being classified, for toxicity, in cat. 2 instead of cat. 1.
DESCALINOX P 22
New formulation for electrolytic pickling based on organic acids, labeled as irritant only, ideal for applications within production areas.
DESCALINOX P 23
Formulation based on sulfuric acid, with the addition of wetting and leveling agents, for the electrolytic pickling of stainless steels.
DESCALINOX P 27
Traditional nitro hydrofluoric acid based pickling product. Under appropriate operating conditions the product creates a smooth attack useful for cold forming oil anchoring
DESCALINOX P 31
Nitric-free product for pickling and satin finishing of stainless steel surfaces. The satin effect allows to create a homogeneous etching, useful for oil pick up in cold deformation processes such as drawing and moulding.
DESCALINOX P 61
Nitric acid free product used both in passivation of any stainless steel alloy as well as in bleaching of alloys series 400
OSSIDANTE OX 53-INOX
Product based on hydrogen peroxide for the control of the redox potential in the pickling processes of stainless steels.
SYSTEMS FOR CHEMICAL PICKLING
Pickling plants made in polypropylene, complete with fumes scrubber, rinse tanks, stirring devices, agitation, heating and products dosing. For regeneration units, water recycle and waste purification see the relevant specification.
CATALYTIC OXIDATION - PEROXY STEEL® FOR STAINLESS STEEL
Catalytic oxidation on nitric acid-free baths for the regeneration of trivalent iron. Catalytic oxidation on traditional baths for the reduction of NOx emissions through the regeneration of nitric acid.
ACID RETARDATION - RESIBED
Acid delay unit for the recovery of free acids and the maintenance of the concentration of dissolved metals at constant values.
ELECTROLYTIC PICKLING - ELETTRA CEPL
Complete plants for in line electrolytic pickling of coils, bars and rods working with nitric and hydrofluoric acid free solution.
ELECTROPOLISHING UNIT - ELETTRA CEL
Complete systems for the in-line electropolishing of tubes, bars and profiles.