CARBON STEEL
STAINLESS STEEL AND TITANIUM
ALUMINIUM COILS
COIL COATING
COPPER AND ALLOYS
PAINTS FOR COIL COATING
CARBON STEEL
STAINLESS STEEL
ALUMINIUM AND ALLOYS
COPPER AND BRASS
TITANIUM ZIRCONIUM AND NICKEL
CARBON STEEL
STAINLESS STEEL
ALUMINIUM AND ALLOYS
COPPER AND ALLOYS
TITANIUM-ZIRCONIUM-NICKEL
CARBON STEEL
STAINLESS STEEL
ALUMINIUM AND LIGHT ALLOYS
COPPER AND ALLOYS
ALUMINIUM PRE-PAINTING
METAL PRE-PAINT
PAINT STRIPPING
BOOTH WATER TREATMENT
QUENCHING POLYMERS
ZINC REMOVAL
PICKLING
DEGREASING
QUENCH
PASSIVATION
ANODIZING
COLORING
FIXING
SURFACE PREPARATION
VIBROFINISHING PRODUCTS
STAINLESS STEEL
COPPER AND ALLOYS
CHEMICAL ETCHING
PENETRANTS
DEGREASERS
PRINTED CIRCUITS
ANTIFOAM
DETERGENT
AIR RELEASE AGENT
CONDITIONERS
DETERGENT
WATER TREATMENT
ANTIFOAM
ACTIVE CARBON
PICKLING - DEOXIDATION
CLEANING
WATERBORNE DEGREASER
SOLVENTBORNE DEGREASER
PAINT STRIPPING
DEGREASER
CONDORINE 105 P
Slightly alkaline liquid product. Suitable to degrease copper and alloys also for quick operations in line. To be used also by spray.
CONDORINE M 142
Acid liquid product. It is suitable to degrease, pickle and brighten up copper and its alloys, free of chromates, phosphates, nitrates and fluorides.
ULTRAFILTRATION - M400 - MINERVA
M400 and MINERVA units are used to continuously regenerate acid, alkaline and neutral aqueous matrix degreasing baths used in painting and in the mechanical, metallurgical, food industries, etc. (For solvents see Diana unit – section: Lubrication)
ADDITIVE MIX CM
Surfactant based liquid product. It can be added at any degreasing product to increase its detergent capacity in dip plants.
CONDORINE SG 588 P
Alkaline powder degreaser ideal for carbon steel and copper alloys. Formulated to remove oils, greases and rolling pastes.
MIX EM ADDITIVE
Degreasing additive for spray and immersion applications. Based on surfactants, it increases the degreasing power.