LUBRICANTS FOR COLD FORMING
ULTRAFILTRATION - DIANA C 500
Diana C 500 units are proposed for the continuous regeneration of hydrocarbons, synthetic oils and mineral oils. The regeneration cycle provides for the continuous elimination of the pollutants which generally cause the aging of these fluids, i.e. water, metals, soaps, non-reactive salts, oxides, degradation polymers, complex metals, etc.
OIL REMOVAL UNIT - BLADE OIL - BLADE MUD
Blade Oil coalescing oil separator allows the continuous elimination of microparticles of free oil dispersed in the testing and degreasing tanks and in the coolant emulsions, thus prolonging their life. The lamellar coalescence clarifier allows to purify oily emulsions and degreasing by simultaneously separating sedimentable materials (oxide, chips), floating materials (oils, hydraulic fluids, soaps, etc.) and dispersed suspensions.
ULTRAFILTRATION - SEPAR 600
Separ units are used to treat spent oil emulsions. The emulsions are separated in oil-free water and in oil that can be disposed through the waste oil consortia.
CONDORLUBE S 400
Mineral oils free based product with high cooling capacity, excellent lubricant and protective power and high wetting capacity. This product contains proper biostatic agents which grant the control of bacteria growing.
CONDORLUBE DF 18
Non-reactive water based polymeric lubricant, for cold forming of carbon steel and stainless steel and non-ferrous materials. Compared to the traditional polymeric lubricants, it is suitable for high reductions.
CONDORLUBE SP
Deep forging paste for stainless steel. Thanks to its special additives, guarantees good results in high pressure processes.
CONDORLUBE R 321 VG
Synthetic lubricant for cold forming processes such as threading, skiving and rolling.
ULTRAFILTRATION ZEFIRO
The ZEFIRO units are used to batch process different types of wastewater. In particular, they allow to treat spent emulsions, separating the water from the oil, and to regenerate water-soluble coolants and spent degreasers.
CONDORLUBE DRAW 14
Water-soluble coolant, based on vegetable soaps, it is primarily used to replace the classic emulsions in molding and shearing operations.