Slightly alkaline powder product. Suitable for any metal, free of caustic soda and ligninsulphonates. It is mainly used to remove the polishing pastes. e.g in plating lines. Condorine 841 CM is used in immersion systems while Condorine 841 SP is used in spray systems.
Alkaline liquid product. Suitable on steel and stainless steel, for degreasing and simultaneous removal of oxides, phosphates and iron oxalates. Rich in sequestering agents, it also eliminates drawing soaps rich in calcium.
Neutral liquid product. Vegetal soaps based product, excellent in removing polishing pastes from any metal in ultrasonic plant.
Neutral liquid product. Similar to 110 N4 but best used in removal of oils from any metal in ultrasonic plants.
Alkaline liquid product. To be used by spray or immersion. No rinse required.
Alkaline liquid product. It is mainly used to remove lapping pastes. To be used also by dip or ultrasonic. No final rinse required.
Neutral liquid product. It is used to degrease, brighten up and protect surfaces. No following rinse required. Condorine 149 CM is used in immersion systems while Condorine 149 SP is used in spray systems
Alkaline powder product. Low content of caustic soda to be used in anodic and cathodic current.
Alkaline liquid product. Suitable for degreasing and simultaneous removal of drawing stearates and oils. it can be also used in electrolytic plants both in anodic and cathodic current.
Isoparaffinic solventes based product, emulsifiable, for cold degreasing of pieces highly contaminated with oils and greases.
Neutral liquid product. Odourless and non flammable isoparaffine based product. It is used to clean surfaces from oils, greasy and prints.
Phosphoric acid based degreasing for in line cleaning with ultrasonics. High specificity in removing stearates. It guarantees a surface totally free of residual.
Mild alkaline degreaser to be used at medium low temperature. It does not saponify rolling oils of animal or vegetal nature avoiding foam formation
Liquid alkaline product for electrolytic degreasing of carbon steel, stainless steel, copper and alloys.
Medium alkalinity liquid product to remove polishing and pastes from steel using ultrasonics.
Slightly alkaline liquid product to replace strong caustic blend working at lower temperature and with a higher degreasing power.
Medium alkalinity liquid degreaser. It has a good wetting power for the removal of oils and glues.
Highly concentrated and rinseable degreasing product. It can be used on all metals. Available in SG 515 BT version for use at low temperatures (30-40°C).
© Copyright 2024 All Rights Reserved