Organic and inorganic based acid product, free of sulphuric, phosphoric, nitric and hydrofluoric acids. It is used to remove light oxidations and for iron decontamination of austenitic stainless steel as well as for pickling and iron decontamination of ferritic stainless steels.
Diffusion dialysis units to recover free acids and keep concentration of dissolved metals at steady values.
Catalytic oxidation on nitric acid-free baths for the regeneration of trivalent iron. Catalytic oxidation on traditional baths for the reduction of NOx emissions through the regeneration of nitric acid.
Acid delay unit for the recovery of free acids and the maintenance of the concentration of dissolved metals at constant values.
Liquid pickler for stainless steel. It is the least aggressive of the series, mainly used when a reduced satin finishing of the metal surface is required. Application by spray.
Highly acid gel product. Standard product, it meets main needs of the field. It can be used for stainless steel. Application by brush.
Active pickling fluid gel, free of nitric acid. Low pressure spray application.
Strong pickling fluid gel, nitric and hydrofluoric acid based. Low pressure spray application.
Formulation based on sulfuric acid, with the addition of wetting and leveling agents, for the electrolytic pickling of stainless steels.
Balanced acid product for stainless steel pickling with nitric free solutions to be used combined with our Oxydizer OX 53.
Traditional nitro hydrofluoric acid based pickling product. Under appropriate operating conditions the product creates a smooth attack useful for cold forming oil anchoring
Stabilizing agent used to reduce the consumption of hydrogen peroxide in nitric-free pickling
Pickling agents for stainless steel. They are the evolution of Descalinox P13 FAST and Descalinox P 14 FAST being classified, for toxicity, in cat. 2 instead of cat. 1.
Activated product for preparation of baths for stainless steel nitric free pickling.
Evolution of the previous P13 and P14, they contain special additives that accelerate the pickling speed, reducing the treatment times. To be used combined with our Oxydizer OX 53.
Ferric salts concentrate for activation of pickling solutions free of nitric acid.
Nitric and hydrofluoric acid free pickling agent for AISI 400 or to eliminate light oxides from AISI 300 and the inorganic charges contained in the lubricants.
Balanced acid product for stainless steel pickling with nitric free solutions to be used combined with our Oxydizer OX 53.
New formulation for electrolytic pickling based on organic acids, labeled as irritant only, ideal for applications within production areas.
Pretreatment product for martensitic and ferritic steels on replacement of melted salts/sand blasting/permanganate.
© Copyright 2024 All Rights Reserved