DEGREASERS
CONDORINE 841 CM
Slightly alkaline powder product. Suitable for any metal, free of caustic soda and ligninsulphonates. It is mainly used to remove the polishing pastes. e.g in plating lines. Condorine 841 CM is used in immersion systems while Condorine 841 SP is used in spray systems.
CONDORINE 110 N4
Neutral liquid product. Vegetal soaps based product, excellent in removing polishing pastes from any metal in ultrasonic plant.
CONDORINE 149 CM - 149 SP
Neutral liquid product. It is used to degrease, brighten up and protect surfaces. No following rinse required. Condorine 149 CM is used in immersion systems while Condorine 149 SP is used in spray systems
ULTRAFILTRATION - M400 - MINERVA
M400 and MINERVA units are used to continuously regenerate acid, alkaline and neutral aqueous matrix degreasing baths used in painting and in the mechanical, metallurgical, food industries, etc. (For solvents see Diana unit – section: Lubrication)
CONDORINE SG 511 N
Mild alkaline degreaser to be used at medium low temperature. It does not saponify rolling oils of animal or vegetal nature avoiding foam formation
CONDORINE 113
Slightly alkaline product used to degrease aluminium surfaces. High content of buffering and inhibiting substances avoid the metal surface etching
CONDORINE 835
Slightly alkaline powder product for degreasing of any metal, light alloys included.
CONDORINE R 64
Condorine R 64 is a low impact isoparaffin-based degreaser designed for all metals and any kind of plastic. It is mainly used to remove oils and greases from highly contaminated pieces, mainly by dissolving them. No rinse. It evaporates very quickly with air.
ULTRAFILTRATION ZEFIRO
The ZEFIRO units are used to batch process different types of wastewater. In particular, they allow to treat spent emulsions, separating the water from the oil, and to regenerate water-soluble coolants and spent degreasers.
CONDORINE SG 576 N
Neutral degreaser. It is mainly used in washing and mechanical deburring processes at high pressure (up to 500 Bar).
CONDORINE 310 Z
Alkaline degreaser, multimetals for immersion application ( also ultrasonic). Product is designed to treat fragile metals (light alloys, aluminum alloys, zamak, etc.)
CONDORITE 746 MG
Deoxidizer Degreaser for aluminum alloys. Condorite 746 MG is used to clean and polish aluminium surfaces in immersion processes (also in ultrasonic applications)