CARBON STEEL
STAINLESS STEEL AND TITANIUM
ALUMINIUM COILS
COIL COATING
COPPER AND ALLOYS
PAINTS FOR COIL COATING
CARBON STEEL
STAINLESS STEEL
ALUMINIUM AND ALLOYS
COPPER AND BRASS
TITANIUM ZIRCONIUM AND NICKEL
CARBON STEEL
STAINLESS STEEL
ALUMINIUM AND ALLOYS
COPPER AND ALLOYS
TITANIUM-ZIRCONIUM-NICKEL
CARBON STEEL
STAINLESS STEEL
ALUMINIUM AND LIGHT ALLOYS
COPPER AND ALLOYS
ALUMINIUM PRE-PAINTING
METAL PRE-PAINT
PAINT STRIPPING
BOOTH WATER TREATMENT
QUENCHING POLYMERS
ZINC REMOVAL
PICKLING
DEGREASING
QUENCH
PASSIVATION
ANODIZING
COLORING
FIXING
SURFACE PREPARATION
VIBROFINISHING PRODUCTS
STAINLESS STEEL
COPPER AND ALLOYS
CHEMICAL ETCHING
PENETRANTS
DEGREASERS
PRINTED CIRCUITS
ANTIFOAM
DETERGENT
AIR RELEASE AGENT
CONDITIONERS
DETERGENT
WATER TREATMENT
ANTIFOAM
ACTIVE CARBON
PICKLING - DEOXIDATION
CLEANING
WATERBORNE DEGREASER
SOLVENTBORNE DEGREASER
PAINT STRIPPING
LUBRICANTS FOR COLD FORMING
ULTRAFILTRATION - DIANA C 500
Diana C 500 units are proposed for the continuous regeneration of hydrocarbons, synthetic oils and mineral oils. The regeneration cycle provides for the continuous elimination of the pollutants which generally cause the aging of these fluids, i.e. water, metals, soaps, non-reactive salts, oxides, degradation polymers, complex metals, etc.
OIL REMOVAL UNIT - BLADE OIL - BLADE MUD
Blade Oil coalescing oil separator allows the continuous elimination of microparticles of free oil dispersed in the testing and degreasing tanks and in the coolant emulsions, thus prolonging their life. The lamellar coalescence clarifier allows to purify oily emulsions and degreasing by simultaneously separating sedimentable materials (oxide, chips), floating materials (oils, hydraulic fluids, soaps, etc.) and dispersed suspensions.
ULTRAFILTRATION - SEPAR 600
Separ units are used to treat spent oil emulsions. The emulsions are separated in oil-free water and in oil that can be disposed through the waste oil consortia.
ULTRAFILTRATION ZEFIRO
The ZEFIRO units are used to batch process different types of wastewater. In particular, they allow to treat spent emulsions, separating the water from the oil, and to regenerate water-soluble coolants and spent degreasers.
CONDORLUBE DRAW 14
Water-soluble coolant, based on vegetable soaps, it is primarily used to replace the classic emulsions in molding and shearing operations.
CONDORLUBE R 64 TJ
Evaporable lubricant, based on isoparaffins, is mainly used in light cold forming operations.