DEGREASERS
CONDORINE SG19 SP
Slightly alkaline powder product. Suitable for any metal, free of caustic alkalis, phosphates and silicates.
CONDORINE 111 CM
Slightly alkaline powder product. Suitable for any metal, free of caustic alkalis and phosphates. CM version is used in immersion systems while SP version is used in spray systems.
CONDORINE 841 CM
Slightly alkaline powder product. Suitable for any metal, free of caustic soda and ligninsulphonates. It is mainly used to remove the polishing pastes. e.g in plating lines. Condorine 841 CM is used in immersion systems while Condorine 841 SP is used in spray systems.
CONDORINE 105 P
Slightly alkaline liquid product. Suitable to degrease copper and alloys also for quick operations in line. To be used also by spray.
CONDORINE 144 CU
Slightly alkaline liquid product. Suitable for degreasing of copper alloys also for quick operation in line. It avoids hydroxides precipitation and is chosen when a passivation with triazoles follows. To be used also by spray.
CONDORINE 110 N4
Neutral liquid product. Vegetal soaps based product, excellent in removing polishing pastes from any metal in ultrasonic plant.
CONDORINE 160 N4
Neutral liquid product. Similar to 110 N4 but best used in removal of oils from any metal in ultrasonic plants.
CONDORINE 149 CM - 149 SP
Neutral liquid product. It is used to degrease, brighten up and protect surfaces. No following rinse required. Condorine 149 CM is used in immersion systems while Condorine 149 SP is used in spray systems
CONDORINE 150 AC
Alkaline powder product. Low content of caustic soda to be used in anodic and cathodic current.
CONDORINE SO 104 P 70
Isoparaffinic solventes based product, emulsifiable, for cold degreasing of pieces highly contaminated with oils and greases.
ULTRAFILTRATION - M400 - MINERVA
M400 and MINERVA units are used to continuously regenerate acid, alkaline and neutral aqueous matrix degreasing baths used in painting and in the mechanical, metallurgical, food industries, etc. (For solvents see Diana unit – section: Lubrication)
CONDORINE R 59
Neutral liquid product. Odourless and non flammable isoparaffine based product. It is used to clean surfaces from oils, greasy and prints.
CONDORINE 113
Slightly alkaline product used to degrease aluminium surfaces. High content of buffering and inhibiting substances avoid the metal surface etching
CONDORINE SG 582 N
Soaps based degreasing product to cleaning glasses frames in plants with ultrasonic.
CONDORINE 155
Liquid alkaline product for electrolytic degreasing of carbon steel, stainless steel, copper and alloys.
CONDORINE R 65
Iso paraffinic evaporable solvents based product for cold degreasing. It has a good lubricity property.
CONDORINE 300
Medium alkalinity liquid product for degreasing of all metal surfaces, light alloys included.
CONDORINE SG 512 N
Neutral degreaser used on all metals, it is free of alkaline compounds. Mainly used for mineral oils removal.
CONDORINE SG 549 N
Neutral degreaser used on all metals, it is free of alkaline compounds. Mainly used in ultrasound systems.
CONDORINE SG 588 P
Alkaline powder degreaser ideal for carbon steel and copper alloys. Formulated to remove oils, greases and rolling pastes.